11x11 High Country
The Snowtrekker High Country is the product of years in design refinement incorporating simplicity while maximizing interior space, wind resistance and ease of set up.
Base Includes: Frame, Guy Out Ropes
Mid Includes: Frame, Guy Out Ropes, Stove Jack Cover
Pro Screen Includes: Frame, Guy Out Ropes, Stove Jack Cover, Screen Window, Screen Door
Pro Clear Includes: Frame, Guy Out Ropes, Stove Jack Cover, Clear Window, Clear Door
Pro Deluxe Includes: Frame, Guy Out Ropes, Stove Jack Cover, Clear/Screen Window, Clear/Screen Door
The High Country was designed with a shorter ridge length, higher side pullout and steeper pitch. The benefit of this new design is packability, wind resistance, snow shed and snow load ability.
High Country tents maximize interior space and simplicity of setup.
Built with our proprietary 7 oz cotton canvas with reinforced stress points, 12" wide synthetic sod cloth, shock-corded aluminum frame and stove jack. It features an oval door with 2 zipper pull for easy entrance and exit. Sunforger treated for water, mold and mildew repellency. CPAI-84 flame retardant.
Our tents do not have a floor. Please see our ground tarps for options.
3-4 On Ground Pads - 2-3 On Cots
Ridge Height: 7'
Ridge Length: 7'5"
Picket Height: 35.5"
Tent Weight: 18.5 lbs
Frame Weight: 12.7 lbs
Total Weight: 31.2 lbs
5" stove jack opening standard. 3" or 4" available upon request.
Easton Lightweight Frame: Saves .7 lbs
Requires 14 Tent Stakes: Sold Separately
We recommend the Large stove for this tent
Cleaning:
1. Use clean tap water with soft brush, OR spray nozzle
2. Brush with medium soft bristle brush
- DO NOT use solvents, soaps or detergents
- Washing or scrubbing the tent will have an adverse effect on the flame retardant finish
- Petroleum and/or kerosene fumes may adversely effect the treatment of the fabric
- Care should be taken to keep fabric clean from any foreign substances, especially acid forming chemicals and staining
- If fabric has been exposed to salt water, wash with hose using tap water
- If insect repellent is used around the tent fabric, do not spray directly on fabric. An agent in most sprays as a propellant will damage water repellent finishes.
After Use Before Storage:
Snowtrekker® Tents must be completely dry before packing away to prevent mildew from forming. NEVER store a tent when damp. Never keep a tent set up for long periods of time in a location where it will not dry out
Patching:
A scrap of canvas is enclosed in case you need to patch the tent. We recommend using Bish’s Tear Mender- a flexible glue that is bomb proof and is flexible in the cold. It's what we use.
Snowtrekker has built its reputation by designing and manufacturing tents that exceed our customers’ expectations for quality, durability and customer service. Our 3-year non-transferable warranty covers manufacturing defects* in materials and workmanship for 3 years from the original owner’s date of purchase.
Snowtrekker Tents will repair or replace at its discretion any manufacturing defects in its products free of charge. The Snowtrekker warranty does not cover damage caused by normal wear and tear**, snow load (snow must be clear from the roof in heavy snowfall conditions), high winds, improper care or cleaning, non-standard usage, negligence, or accidents (fire, lost, stolen). Tents must be anchored to the ground either with snow or stakes, fully guyed out with vertical pickets installed. Door must be closed in high wind conditions. Snow must be cleared from the roof in heavy snowfall conditions. Damage caused by leaving tent set up in damp high moisture environments for extended periods may cause mildew and degradation of fabric and is not covered by warranty. Stoves must be positioned 20 inches from all walls of the tent. Failure to follow these directions will void any warranty claims in these situations.
Product must be purchased from Snowtrekker or an authorized Snowtrekker dealer.
Warranty claims must be submitted to Snowtrekker with photographs of the manufacturing defect. Tents can be submitted for evaluation and if a manufacturing defect is found the customer will be reimbursed for shipping.
If there is any damage in the shipping process to you, we must be notified within 3 days with supporting photos, including photos of the box. It is advisable if the packaging is damaged that you take photos before opening.
Save the package that was damaged.
Non warranty damage can be repaired. Fill out the contact form and we will work with you to provide a repair quote.
MANUFACTURING DEFECTS
A manufacturing defect exists if the product departs from its intended design and specification during manufacturing. Defective materials (zippers, fabric, etc.) or workmanship (seams, construction, etc.) are covered by the Snowtrekker warranty for 3 years from the original owner’s date of purchase.
WEAR AND TEAR
Wear and tear is damage that naturally and inevitably occurs as the result of normal use. Moving parts will wear out and fabrics with deteriorate and fade over time. And while we choose the best materials available for the application, all materials degrade over time with use and exposure to the elements.